Wednesday, November 3, 2010

Husaberg FE450 Enduro, 2010

 Husaberg FE450 Enduro, 2010 
 

Upside-down fork
The fully adjustable 48 mm fork from WP Suspension has been further optimised to ensure even more responsive handling and provide high damping reserves. Combined with the increased 22 mm offset (previously 19 mm) of the CNC-machined triple clamps, this guarantees more reliable front wheel control.

Airbox
Positioned directly behind the fuel cap, it is covered by the front section of the seat. The airbox’s elevated position guarantees the intake of cool, clean air and maximum wading depth. The intake duct is in the direct downdraft from the filter to the cylinder.

Tank
The slim, 8.5 litre tank runs far below the seat to provide an optimal centre of gravity and is equipped with both a compact fuel pump and new reserve sensor. The transparent polyethylene also enables the fill level to be determined at a glance.

Exhaust System
The integration of the stainless steel exhaust manifold offers optimum protection from rock damage and keeps the rider from coming into direct contact with it.

Brakes
The latest Brembo front brake with optimised front brake pads for maximum braking performance at minimal effort. Effective single-piston brake caliper in the rear. Ultra-light wave discs for the ultimate braking performance and better self-cleaning of the brakes.

PDS Shock
Fully adjustable WP PDS shock with optimised setting for even more traction. Adjustable rebound damping and variable high and low speed compression damping guarantee the perfect configuration for all conditions.

Frame
Light double-cradle perimeter frame made of chrome-molybdenum. Guarantees the greatest torsional rigidity and secure tracking stability. Extremely slender lower tube loops. Minimal overall width. Unbeatable ground clearance.

Silencer
Especially light and made of high quality aluminium, the silencer assures compliance with all official noise limits.

Subframe
Cross-linked polyethylene (PE) ensures that the plastic construction has the highest stability values and a reduced weight at the same time. Many electric components have been perfectly imbedded in the rear fender.

Specifications, Husaberg FE450 Enduro, 2010

Engine
Engine type Single cylinder, 4-stroke
Displacement 449.3 cc
Bore/Stroke 95 / 63.4 mm
Compression ratio 11.8 : 1
Starter/Battery Electric starter/12 V 7 Ah
Transmission 6 gears
Fuel system Keihin EFI
Control 4 V / OHC with rocker levers
Lubrication Pressure lubrication with 2 oil pumps
Engine Oil Motorex, SAE 10W-50
Primary ratio 33 : 76
Secondary drive 13 : 38 (13 : 52)
Cooling Liquid cooling
Clutch Wet multi-disc clutch, hydraulically operated
Engine Management System Keihin

Chassis
Frame Double cradle perimeter design 25CrMo4
Subframe Cross-linked Polyethylene (PE)
Handlebar Magura, Aluminium Ø 28 / 22 mm
Front suspension WP-USD Ø 48 mm
Rear suspension WP-PDS shock absorber
Suspension travel front/rear 300 / 335 mm
Front/rear brakes Disc brake Ø 260 mm/Disc brake Ø 220 mm
Front/rear rims 1.60 x 21" DID/2.15 x 18" DID
Front/rear tires 90/90-21"; 140/80-18"
Chain 5/8 x 1/4"
Silencer Aluminium
Steering Head Angle 63.5°
Wheel base 1,475 ± 10 mm
Ground clearance 390 mm
Seat height 985 mm
Tank capacitiy approx. 8.5 litres
Weight (Ready to Race) approx. 114 kg - Specifications

Engine
Engine type Single cylinder, 4-stroke
Displacement 449.3 cc
Bore/Stroke 95 / 63.4 mm
Compression ratio 11.8 : 1
Starter/Battery Electric starter/12 V 7 Ah
Transmission 6 gears
Fuel system Keihin EFI
Control 4 V / OHC with rocker levers
Lubrication Pressure lubrication with 2 oil pumps
Engine Oil Motorex, SAE 10W-50
Primary ratio 33 : 76
Secondary drive 13 : 38 (13 : 52)
Cooling Liquid cooling
Clutch Wet multi-disc clutch, hydraulically operated
Engine Management System Keihin

Chassis
Frame Double cradle perimeter design 25CrMo4
Subframe Cross-linked Polyethylene (PE)
Handlebar Magura, Aluminium Ø 28 / 22 mm
Front suspension WP-USD Ø 48 mm
Rear suspension WP-PDS shock absorber
Suspension travel front/rear 300 / 335 mm
Front/rear brakes Disc brake Ø 260 mm/Disc brake Ø 220 mm
Front/rear rims 1.60 x 21" DID/2.15 x 18" DID
Front/rear tires 90/90-21"; 140/80-18"
Chain 5/8 x 1/4"
Silencer Aluminium
Steering Head Angle 63.5°
Wheel base 1,475 ± 10 mm
Ground clearance 390 mm
Seat height 985 mm
Tank capacitiy approx. 8.5 litres
Weight (Ready to Race) approx. 114 kg 

Husaberg FE390 Enduro, 2010

Husaberg FE390 Enduro, 2010

 


Key Features

Upside-down fork
The fully adjustable 48 mm fork from WP Suspension has been further optimised to ensure even more responsive handling and provide high damping reserves. Combined with the increased 22 mm offset (previously 19 mm) of the CNC-machined triple clamps, this guarantees more reliable front wheel control.

Airbox
Positioned directly behind the fuel cap, it is covered by the front section of the seat. The airbox’s elevated position guarantees the intake of cool, clean air and maximum wading depth. The intake duct is in the direct downdraft from the filter to the cylinder.

Tank
The slim, 8.5 litre tank runs far below the seat to provide an optimal centre of gravity and is equipped with both a compact fuel pump and new reserve sensor. The transparent polyethylene also enables the fill level to be determined at a glance.

Exhaust System
The integration of the stainless steel exhaust manifold offers optimum protection from rock damage and keeps the rider from coming into direct contact with it.

Brakes
The latest Brembo front brake with optimised front brake pads for maximum braking performance at minimal effort. Effective single-piston brake caliper in the rear. Ultra-light wave discs for the ultimate braking performance and better self-cleaning of the brakes.

PDS Shock
Fully adjustable WP PDS shock with optimised setting for even more traction. Adjustable rebound damping and variable high and low speed compression damping guarantee the perfect configuration for all conditions.

Engine
Engine type Single cylinder, 4-stroke
Displacement 393.3 mm
Bore / stroke 95 / 55.5 mm
Compression ratio 11.1 : 1
Starter / battery Electric starter / 12 V 7Ah
Transmission 6 gears
Fuel system Keihin EFI
Control 4 V / OHC with rocker levers
Lubrica tion Pressure lubrication with 2 oil pumps
Engine oil Motorex, SAE 10W-50
Primary ratio 33 : 76
Final drive 13 : 38 (13 : 52)
Cooling Liquid cooling
Clutch Wet multi-disc clutch, hydraulically operated
Engine management Keihin

Chassis
Frame Double cradle perimeter design 25CrMo4
Subframe Cross-linked Polyethylene
Handlebar Magura, Aluminium Ø 28 / 22 mm
Front suspension WP-USD Ø 48 mm
Rear suspension WP-PDS shock absorber
Susp. travel front / rear 300 / 335 mm
Front / rear brakes Disc brake
Ø 260 / 220 mm
Front / rear rims 1.60 x 21"; 2.15 x 18" DID
Front / rear tires 90 / 90-21"; 140 / 80-18"
Chain Chain 5/8 x 1/4"
Silencer Aluminium
Steering head angle 63.5°
Wheel base 1,475 +/– 10 mm
Ground clearance 390 mm
Seat height 985 mm
Tank capacity approx. 8.5 litres
Weight (ready to race) approx. 114 kg (without fuel)

Ural Retro Solo, 2009

Ural Retro Solo, 2009


 

Engine
Type Air cooled 2-cylinder 4-stroke Boxer engine
Bore/stroke 78 mm x 78 mm
Capacity 745 cc
Rated output 29 kW at 5,600 rpm
Max. torque 52 Nm at 4,000 rpm
Carburator Twin KEIHIN L22A A
Max. speed Approx.130 km/h
Ignition Electronic

Power transmission
Clutch Dry double disc
Gearbox 4 speed plus 1 reverse
Final drive Bevel gear with drive shaft
Starting Electric plus kickstart

Chassis/Brakes
Frame Double loop steel tube
Front suspension Telescopic fork
Rear suspension Double sided swinging arm with hydraulic spring shock absorbers - 2 x adjustable
Wheels 2 cross-spoked
Rims 2.15 x 18
Tyres Road tyres 3,50 x 18
Brakes front: discbrake
rear: mechanically actuated drumbrakes

Dimensions/Weights
Dry weight 246 kg
Permitted total weight 399 kg
Length/width/height 2,224/840/1,060 mm
Seat height 750 mm
Usable tank volume 19 l, 95 Octan
Fuel consumption 6.5 l/100 km 

Ural Retro, 2009

Ural Retro,  2009 


 
SPECIFICATIONS - 2009 Ural Retro:

Engine
Type Air cooled 2-cylinder 4-stroke Boxer engine
Bore/stroke 78 mm x 78 mm
Capacity 745 cc
Rated output 29 kW at 5,600 rpm
Max. torque 52 Nm at 4,000 rpm
Carburator Twin KEIHIN L22A A
Max. speed approx.100 km/h
Ignition Electronic

Power transmission
Clutch Dry double disc
Gearbox 4 speed plus 1 reverse
Final drive Bevel gear with drive shaft
Starting Electric plus kickstart

Chassis/Brakes
Frame Double loop steel tube
Front suspension Telescopic fork
Rear suspension Double sided swinging arm with hydraulic spring shock absorbers - 2 x adjustable
Sidecar suspenison Single sided swinging arm with hydraulic spring shock absorbers - 2 x adjustable
Wheels 3 cross-spoked wheels
Rims 2.15 x 18
Tyres Road tyres 3.50 x 18
Brakes front wheel: discbrake
rear and sidecar wheel: mechanically actuated drumbrakes

Dimensions/Weights

Dry weight 350 kg
Permitted total weight 610 kg
Length/width/height 2,280/1,630/1,045 mm
Seat height 750 mm
Usable tank volume 19 l, 95 Octan
Fuel consumption 7.5 l/100 km

Ural Ranger, 2009

Ural Ranger, 2009

The Ural Ranger. Just like the Patrol, with its on-demand sidecar drive, Ranger’s origins trace back to the military past of the Ural motorcycle family. The Ranger combination is as tough as a Russian AK-47!

USA SPECIFICATIONS
2009 Ural Ranger:

Engine
Type Air cooled 2-cylinder 4-stroke Boxer engine
Bore/stroke 78 mm x 78 mm
Capacity 745 cc
Rated output 29 kW at 5,600 rpm
Max. torque 52 Nm at 4,000 rpm
Carburator Twin KEIHIN L22A A
Max. speed approx.100 km/h
Ignition Electronic

Power transmission
Clutch Dry double disc
Gearbox 4 speed plus 1 reverse
Final drive Bevel gear with drive shaft
Special feature Engageable sidecar drive shaft
Starting Electric plus kickstart

Chassis/Brakes
Frame Double loop steel tube
Front suspension Leading link forks with hydraulic spring shock
absorbers - 2 x adjustable
Rear suspension Double sided swinging arm with hydraulic spring shock absorbers - 2 x adjustable
Sidecar suspenison Single sided swinging arm with hydraulic spring shock absorbers - 2 x adjustable
wheels 3 cross-spoked wheels plus 1 reserve wheel
Rims 2.15 x 19
Tyres Road tyres 4.00 x 19 or knobby tyres 4.20 x 19
Brakes Discbrake on frontwheel
Mechanically actuated drumbrakes at rear and sidecar wheel

Dimensions/Weights
Dry weight 350 kg
Permitted total weight 610 kg
Length/width/height 2,580/1,700/1,100 mm
Seat height 790 mm
Usable tank volume 19 l, 95 Octan
Fuel consumption 7.5 l/100 km
Related Posts Plugin for WordPress, Blogger...
Motorcycle Accident Lawyer Information
Richard A. Fisher
A Law Corporation
www.rfisherlaw.com

Motorcycle Accidents

Southern California motorcycle accident attorney Richard A. Fisher has been helping victims of Southern California motorcycle accidents for over thirty-five years. Our experience in handling these cases is supported by the many clients we have helped to obtain proper medical treatment and compensation due to injuries sustained from a motorcycle accident.

Types of motorcycle accidents
Whatever your experience has been in driving a motorcycle, many types of accidents involving motorcycles are common in Southern California. At the Law Offices of Richard A. Fisher, our first priority is to assess your case in detail so we can determine the type of accident you have been involved in. Whether you were rear-ended, had a left-turn collision, were involved with a drunk driver, hit from the side, etc., we can effectively help you get back on your motorcycle and retain compensation for your injuries.

Issues relating to motorcycle accidents
A motorcycle accident is very different from an auto accident. There are several different types of injuries that you can sustain from a motorcycle accident. While the types of injuries vary greatly, serious injuries can include: a brain injury, bodily injuries, a ruptured disc or even wrongful death. Our practice specializes in helping victims of motorcycle accidents recover the maximum damages allowable under the law for your case, from sprain and strain to catastrophic injuries.

Successful cases
The Law Offices of Richard A. Fisher has successfully handled hundreds of auto accident cases throughout Southern California. Some recent cases include:

= Motorcycle Accident (Riverside, California): Intersection Accident involving motorcyclist and automobile. Recovery: $320,000

= Motorcycle Accident: Woman passenger on motorcycle, when involved in a single vehicle accident. Sustained multiple fractures to leg requiring insertion of plate and fracture of scapula. Recovery: $250.000 policy limits

= Motorcycle Accident (Los Angeles, California): Intersection Accident involving motorcyclist and automobile. No witnesses - dispute as to who ran the red light. Recovery: $500,000